Graphic Norton Ghost

Study: Hao Xie

Even if you have the most advanced computer, using traditional methods, Windows installation speed is still a headache! Is there any easy way to reinstall the system do? Of course, Ghost is one option.

Norton Ghost file is relatively small, as long as a master file Ghost.exe (Ghost 2002 only 600 KB) can work on a startup disk can hold. Because it is pure DOS program, and recommends Zhang and Norton Ghost boot disk on a floppy disk. Here we take a look at step by step how to make an image file and restore the system:

Create a primary partition image

After running Norton Ghost, first see the main menu, which is the meaning of each option:

Local: local hard drives operate between

LPT: parallel port connection between the hard disk operation

NetBios: network operating between the hard disk

Option: set (usually the default value)

To stand-alone, for example, choose "Local" menu, where it includes the following sub-menu:

Disk: disk operating options

Partition: partition operation option

Check: Check function (usually ignored)

Well, to understand the meaning of the menu items, we can begin to "Hit Tour" of the.



Figure 1: Select the "partition" to "mirror"

Select "Partition" see the following command:

TO Partition: partition to the partition copy

TO Image: Partition image backup into

From Image: Image Restoration to partition

For general users, most used, or "TO Partition" (partition operation) in the "TO Image" (content back into the image file area) or "From Image" (from the image file to the recovery partition) 2.



Figure 2: The correct choice of the source hard disk

First, clean boot disk with a DOS machine to a pure mode, the implementation of Ghost.exe documents show Ghost in the main screen, select "Local 鈫?Partition 鈫?To Image", the screen shows the hard disk selection screen, select the source partition where the hard drive "1" (note case of double picture shows the hard disk).



Figure 3: The correct choice of the source area

Select the partition to create image files (that is the source partition), select the partition where "1" (ie C partition), select and click "OK" button.



Figure 4: image file name




[Next]



Select the location of image file (It should be noted that the district can not select backup C), then in the "Filename" text box type the image file name, such as "C_BAK" or "C_BAK.GHO", then press Enter or be.



Figure 5: Start making partition image

Norton Ghost will ask you then need to compress image files, "No", said without any compression; "Fast" means that a small percentage of compression for the backup job, but the implementation of speed; "High" is a higher compression But the backup than the relatively slow. Usually select "High", although at a slower pace, but occupied by the hard disk image file will greatly reduce the space.

After all this preparatory work done, Norton Ghost began to make this known to you "C_BAK.GHO" the image file. According to the author's experience, the backup speed and capacity of CPU frequency and content of a great relationship, in general, 64MB memory can reach 71MB/min, the author of the C drive of about 2GB or so used, only took about 10 minutes, in order to avoid Deleted Files, the best attributes of this image file is set to "read."

Restore the primary partition image

Through the above, we have a backup in the D drive called "C_BAK.GHO" the image file, and, where necessary, according to the following steps to quickly restore C drive as it is.



Figure 6: Select the source image file

Run Norton Ghost, in the main menu, select "Local 鈫?Partition 鈫?From Image" item (note this is the "From Image" item), just choose from the D disk primary partition image file C_BAK.GHO.



Figure 7: Determine the source area

From "C_BAK.GHO" select file to restore the partition, there have been only a C partition image, so select the partition directly.



Chart 8: select the target hard disk

Choose to restore the image of the target hard disk, is generally the main hard drive.



Figure 9: determine the target partition

Select the target hard disk to restore the image of the target partition C, pay attention to the target partition must not choose the wrong, or else.

Finally, Norton Ghost will once again ask you to resume operations, and warn you, if carried out as all the information on the target partition will be lost, click on the "Y" began to recover after the operation, time and production time roughly equal to the mirror. After recovery, Norton Ghost will recommend to restart the system, follow the prompts asked to do on it. Soon a clean and perfect the basic system will re-appear in front of you.

Points in the use Norton Ghost

1, the Norton Ghost on the boot disk;

2, set the hard disk work correctly, so your hard work in the Ultra ATA/33/66 mode, make image files faster;

3, image files should be kept "clean", "basic." The more applications installed, the system was the more serious changes, installing new software is also more prone to error, so before making image file, do not install too many applications;

4, to restore image file while the original target disk all the data is overwritten, the use of any anti-delete method can not be resumed.






相关链接:



Dan Zhongshao: I want to lead by two years



mp4 TO avi



Dell amended financial statements over the past four years, net profit is expected to cut 150 millio



Elaboration On The Course JSF Request Processing



Xiang Yang North Korea: IPv6 Pioneering and harvest



c language programming style



Msvideo



For you Accounting And Finance



COMMENTS System Utilities



Converting mp4 to avi



Swf to flv



Can all four FANGGAO Peng effectiveness of the upper floor by Show



Freebsd5.0kde Chinese interface settings